Building an Infrared Paint Remover - LUX.ET.UMBRA
22

Building an Infrared Paint Remover

| | Comments (0) | TrackBacks (0)

This is definitely a worthwhile project if you have the time. Dedicated to a buddy out there that is working on his own business. A DIY Infrared Paint Remover! Retail paint removers run about $400, but with a little work and some careful grounding, you can turn an every-day heater into an IPR.

Here's how.

MAKE < Oceanmanorhouse

0 TrackBacks

Listed below are links to blogs that reference this entry: Building an Infrared Paint Remover.

TrackBack URL for this entry: http://life.firelace.com/mt-cgi/mt-tb.cgi/3583

Leave a comment

 

About this Entry

This page contains a single entry by darkmoon published on April 4, 2006 12:01 AM.

Windows VPN step-by-step was the previous entry in this blog.

Digital movie downloads are doomed to fail is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.

 

 

 

 

Powered by Movable Type 4.21-en